Home go-ycsb load db terminated with message 'Got signal [hangup] to exit'
Post
Cancel

go-ycsb load db terminated with message 'Got signal [hangup] to exit'

During database load phase with go-ycsb, the load process is terminated and the message ‘Got signal [hangup] to exit’ is reported.

1
2
3
4
5
6
7
8
$ nohup ./bin/go-ycsb load cockroach -P workloads/workloadd --threads 96 -p pg.host=<cockroach-host-ip> -p pg.port=26257 -p pg.user=root -p pg.db=test -p pg.sslmode=disable -p dropdata=true  &

INSERT - Takes(s): 6150.0, Count: 66394363, OPS: 10795.9, Avg(us): 8167, Min(us): 1515, Max(us): 28655, 99th(us): 26815, 99.9th(us): 28447, 99.99th(us): 28623
INSERT - Takes(s): 6160.0, Count: 66504914, OPS: 10796.3, Avg(us): 8166, Min(us): 1515, Max(us): 28655, 99th(us): 26815, 99.9th(us): 28447, 99.99th(us): 28623

Got signal [hangup] to exit.
Run finished, takes 1h42m46.015270222s
INSERT - Takes(s): 6166.0, Count: 66570612, OPS: 10796.4, Avg(us): 8166, Min(us): 1515, Max(us): 28655, 99th(us): 26815, 99.9th(us): 28447, 99.99th(us): 28639

To resolve this, after running nohup command, type “exit” to exit the current shell instead of closing the shell session directly.

Reference

This post is licensed under CC BY 4.0 by the author.

Limit usable memory size in Linux

Install git from source

Comments powered by Disqus.